Speak 810

• Peak Output Power: 6 W
• Microphone Type: Digital MEMS, bottom port
• Signal to Noise Ratio (SNR): 80±2dB@1W/1m
• Certifications: Regulatory Approvals: CE, FCC, IC, EAC, RRC, CCC, RCM, KCC, TELEC, iDA, NCC, RoHS, REACH, ETA, SIRIM, SDPPI, RCM, NTC Industrial Certifications: Bluetooth 4.1, Skype for Business, Cisco, Avaya, Mitel, Alcatel, Unify

• Connectivity: USB/Bluetooth/3.5 mm jack
• Bluetooth® Standard: Bluetooth® 4.2 – Bluetooth® Low Energy (BTLE)
• Bluetooth Core: Bluetooth version 4.1
• Wireless Range: Up to 30m
• Supported Bluetooth® profiles: A2DP (v1.2), Hands-free Profile (v1.6), Headset Profile (v1.2), AGHFP (v1.6)

• Speakerphone Weight: 965 g / 7.37 oz.
• What's in the Box: Jabra SPEAK 810, Charger (incl. PE bag), Exchangeable pins (4 pcs), Warning leaflet, Warranty leaflet, Quick Start Guide, Korean leaflet, Tape

Yes, you can use a short USB extension cord, up to 5m (15 feet), to extend the length of the USB cable on the Jabra Speak 810. Note that the extension cord must be compliant with USB 2.0.

To manually turn off/on voice guidance, follow these steps.

1. Turn on the Jabra Speak 810 by connecting the supplied power supply to a power outlet.
2. Press and hold (8 seconds) the Mute button until the voice prompt confirms the change.

To pair the Jabra Speak 810 with your smartphone, tablet, or other mobile device, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.
2. Turn on the Jabra Speak 810 by connecting the supplied power supply to a power outlet.
3. To enter pairing mode, tap the Bluetooth button and the icon will flash blue.
4. To pair, go to the Bluetooth menu on your mobile device and select the Jabra Speak 810 from the list of available devices.
   Enter “0000” (four zeros) if you are asked for a pin code.

Reconnecting
The Jabra Speak 810 is designed to be used in rooms where many people may access the unit. Therefore, it does not automatically reconnect to known devices – you must reconnect manually. The Jabra Speak 810 can remember up to 900 devices in the pairing list. However, there can be only one active Bluetooth connection at a time.

Note
If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device.

The Jabra Speak 810 is designed for mid-sized meeting rooms. Place it on a level surface in the center of the table, and take care not to cover the microphone or speakers. For optimal audio quality, avoid placing other objects too close to the Jabra Speak 810. Objects may reflect the sound and cause poor audio quality or an echo.

The audio quality may be distorted if other objects, such as a computer monitor, are placed too close to the Jabra Speak 810. Objects placed within 50cm/19 inches of the Jabra Speak 810 may reflect the sound and cause poor audio quality or an echo. If this occurs, move the object away from the Jabra Speak 810 until the distortion disappears.

Distortion may also occur if the device used with the Jabra Speak 810 is connected to both the 3.5mm jack (AUX) and the USB charging port. To resolve this, unplug the device from one of the connections.

To ensure the best performance of the Jabra Speak 810, we recommend that you keep it updated with the latest firmware.